sizing guide
ring sizing guidelines
bangle sizing guidelines
cuff and bracelet sizing guidelines
ring sizing
if you have a ring that you already wear comfortably, you can easily use it to determine your size. here’s a simple guide to help you measure the inside of your ring and find your perfect fit.
you’ll want to measure the Diameter of the inside of the ring. place the ring on a flat surface and measure straight across the centre from one inner edge to the other. make sure to measure in millimetres for the most accurate result.
if you don’t have a ring handy, don’t worry! you can also measure your finger directly. use a piece of string or a strip of paper to wrap tightly around the Circumference of your finger. mark where the string or paper overlaps, then measure the length.
remember, your fingers can change size due to temperature, time of day, or even your diet, so it’s a good idea to measure at different times to ensure you get the most accurate size. if you’re between sizes, it’s often best to go with the larger size for comfort.
size guide:
A: D. 12.0mm C. 37.8mm
B: D. 12.4mm C. 39.1mm
C: D. 12.8mm C. 40.4mm
D: D. 13.2mm C. 41.7mm
E: D. 13.6mm C. 42.9mm
F: D. 14.0mm C. 44.2mm
G: D. 14.4mm C. 45.5mm
H: D. 14.8mm C. 46.8mm
I: D. 15.2mm C. 48.0mm
J: D. 15.6mm C. 48.7mm
K: D. 16.0mm C. 50.0mm
L: D. 16.4mm C. 51.2mm
M: D. 16.8mm C. 52.5mm
N: D. 17.2mm C. 53.8mm
O: D. 17.6mm C. 55.1mm
P: D. 18.0mm C. 56.3mm
Q: D. 18.4mm C. 57.6mm
R: D. 18.8mm C. 58.9mm
S: D. 19.2mm C. 60.2mm
T: D. 19.5mm C. 61.4mm
U: D. 19.9mm C. 62.7mm
V: D. 20.3mm C. 64.0mm
W: D. 20.7mm C. 65.3mm
X: D. 21.1mm C. 66.6mm
Y: D. 21.5mm C. 67.8mm
Z: D. 21.7mm C. 68.5mm
bangle sizing
here are two simple methods to help you determine the right fit.
1. the string method: this is one of the easiest ways to measure your bangle size. grab a piece of string or a flexible measuring tape. wrap it around the widest part of your hand, usually around the knuckles. make sure it's snug but not too tight. mark where the string overlaps, then measure the length. this measurement in centimetres will give you a good idea of your bangle size.
2. the bangle method: if you already own a bangle that fits you well, you can use it as a reference. simply measure the inner diameter of the bangle. measure from one inner edge to the opposite inner edge. this measurement will help you find a bangle of the same size or one that is slightly larger or smaller, depending on your preference.
size guide:
XS: C. 18cm D. 55mm
S: C. 19cm D. 59mm
M: C. 20cm D. 64mm
L: C. 21cm D. 67mm
XL: C. 22cm D. 70mm
cuff and bracelet sizing
when it comes to finding the perfect cuff bangle, accurate measurement is key to ensuring a comfortable fit. follow these simple steps to measure your wrist correctly.
start by measuring just below the bone on your wrist area. this is the ideal spot for a cuff bangle or bracelet to sit comfortably without pinching or sliding off. use a flexible measuring tape for the most accurate results.
once you have your measurement, inches for a cuff and centimetres for a bracelet, consider your personal preference for how you like your cuff or bracelet to fit. some people prefer a snug fit, while others enjoy a looser style. depending on your preference, you can adjust your measurement accordingly.
cuffs:
to determine the final size for your cuff, take the total circumference measurement you obtained and subtract 1 inch. this will give you the ideal opening size for your cuff bracelet, ensuring it fits perfectly on your wrist.
size guide: cuff length
S: 5.5 inches
M: 6 inches
L: 6.5 inches
bracelets:
to determine your ideal bracelet size, simply measure the circumference of your wrist and add 2cm to that measurement.
size guide: bracelet length
S: 17 cm
M: 18 cm
L: 19 cm
XL: 20cm
if you need any further assistance, please don’t hesitate to reach out. your satisfaction is our priority, and we’re here to support you every step of the way. just drop us a line at victoria@loveheartsanddaisies.com, and we’ll get back to you as soon as possible.